Harley Davidson Fork Lowering Kit Installation And removal Instruction

download
1. Remove and disassemble forks (including removal of damper rod) according to steps outlined in an authorized service manual for your particular model and year Harley Davidson (see figure 1 for reference). 2. To achieve a one inch (1″) lowered height, leave the stock top out spring on the damper rod and install one Progressive Suspension top out spring on the damper rod with the stock top out spring (see figure 2). Proceed to step 4. 3. To achieve a two inch (2″) lowered height, leave the stock top out spring on the damper rod and install two Progressive Suspension top out springs on the damper rod with the stock top out spring (see figure 3). 4. Reinstall damper rods into forks per shop manual. A. Add the proper amount of fork oil as recommended in your shop manual. Make sure the viscosity is the recommended weight. B. Install your Progressive Suspension fork springs with the close wound end up